Alaska Well Data › Anchorage Municipality
Anchorage Municipality, Alaska: well depth, water level & drilling cost
✓ 8,831 Alaska DNR records · verified 2026-08-23
How deep are wells in Anchorage Municipality, Alaska?
The median drilled well depth in Anchorage Municipality is 156 ft, based on 8,731 wells with recorded depths in the state Alaska DNR database. Half of all wells fall between 95 ft and 243 ft; 90% are shallower than 344 ft. Wells drilled since 2016 have a median depth of 204 ft.
How much does it cost to drill a well in Anchorage Municipality?
Applying published per-foot rates to the local median depth of 204 ft: drilling and casing alone typically runs $5,100–$13,260; a complete system including pump, pressure tank, and hookup typically runs $12,240–$20,400. Actual quotes depend on site access, geology, and casing requirements.
Free for property owners. We route your request only to licensed drillers who actually file well logs in Anchorage Municipality — never sold elsewhere.
What is the static water level in Anchorage Municipality?
The median static water level is 60 ft below ground surface (middle half of wells: 30 ft–118 ft), from 3,269 measurements.
How much water do wells in Anchorage Municipality produce?
The median tested yield is 10 gpm (middle half: 5 gpm–20 gpm), from 2,770 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Anchorage Municipality address — $29
Drilled depth distribution
Who drills wells in Anchorage Municipality?
Companies by number of wells completed in this borough, per the well logs Alaska drillers file with DNR.
| Driller | Wells since 2016 |
|---|---|
| HEFTY DRILLING | 176 |
| ALPINE DRILLING AND ENTERPRISES | 107 |
| M-W DRILLING INC | 17 |
| SULLIVAN WATER WELLS | 17 |
| E AND D WATER WELLS | 10 |
| M-W Drilling, Inc. | 7 |
| ACE WATER WELL DRILLING | 6 |
| M-W DRILLING | 1 |
See every driller with wells on record in Anchorage Municipality, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $29Method: medians computed from Alaska DNR records (Alaska DNR WELTS well logs, water-supply wells only (monitoring, test, grounding, geothermal, reinjection and recharge wells excluded); depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.