Alaska Well Data › Copper River Census Area
Copper River Census Area, Alaska: well depth, water level & drilling cost
✓ 448 Alaska DNR records · verified 2026-08-23
How deep are wells in Copper River Census Area, Alaska?
The median drilled well depth in Copper River Census Area is 85 ft, based on 441 wells with recorded depths in the state Alaska DNR database. Half of all wells fall between 47 ft and 180 ft; 90% are shallower than 240 ft. Wells drilled since 2016 have a median depth of 91 ft.
How much does it cost to drill a well in Copper River Census Area?
Applying published per-foot rates to the local median depth of 91 ft: drilling and casing alone typically runs $2,275–$5,915; a complete system including pump, pressure tank, and hookup typically runs $5,460–$9,100. Actual quotes depend on site access, geology, and casing requirements.
Free for property owners. We route your request only to licensed drillers who actually file well logs in Copper River Census Area — never sold elsewhere.
What is the static water level in Copper River Census Area?
The median static water level is 32 ft below ground surface (middle half of wells: 14 ft–109 ft), from 231 measurements.
How much water do wells in Copper River Census Area produce?
The median tested yield is 13 gpm (middle half: 10 gpm–25 gpm), from 176 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Copper River Census Area address — $29
Drilled depth distribution
Who drills wells in Copper River Census Area?
Companies by number of wells completed in this borough, per the well logs Alaska drillers file with DNR.
| Driller | Wells since 2016 |
|---|---|
| HEFTY DRILLING | 27 |
| PIONEER PEAK INDUSTRIES D/B/A VALLEY WELL DRILLING | 7 |
| PIONEER PEAK INDUSTRIES VALLEY WELL DRILLING | 3 |
| Clearwater Wells, LLC | 3 |
| LUKE-N-SONS INC | 2 |
| ALPINE DRILLING AND ENTERPRISES | 2 |
| WHEATON WATER WELL, INC | 1 |
See every driller with wells on record in Copper River Census Area, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $29Method: medians computed from Alaska DNR records (Alaska DNR WELTS well logs, water-supply wells only (monitoring, test, grounding, geothermal, reinjection and recharge wells excluded); depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.