Alaska Well Data › Lake and Peninsula Borough
Lake and Peninsula Borough, Alaska: well depth, water level & drilling cost
✓ 194 Alaska DNR records · verified 2026-08-23
How deep are wells in Lake and Peninsula Borough, Alaska?
The median drilled well depth in Lake and Peninsula Borough is 131 ft, based on 188 wells with recorded depths in the state Alaska DNR database. Half of all wells fall between 80 ft and 201 ft; 90% are shallower than 272 ft. Wells drilled since 2016 have a median depth of 189 ft.
How much does it cost to drill a well in Lake and Peninsula Borough?
Applying published per-foot rates to the local median depth of 189 ft: drilling and casing alone typically runs $4,725–$12,285; a complete system including pump, pressure tank, and hookup typically runs $11,340–$18,900. Actual quotes depend on site access, geology, and casing requirements.
Free for property owners. We route your request only to licensed drillers who actually file well logs in Lake and Peninsula Borough — never sold elsewhere.
What is the static water level in Lake and Peninsula Borough?
The median static water level is 24 ft below ground surface (middle half of wells: 15 ft–40 ft), from 136 measurements.
How much water do wells in Lake and Peninsula Borough produce?
The median tested yield is 15 gpm (middle half: 6 gpm–25 gpm), from 119 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Lake and Peninsula Borough address — $29
Drilled depth distribution
Who drills wells in Lake and Peninsula Borough?
Companies by number of wells completed in this borough, per the well logs Alaska drillers file with DNR.
| Driller | Wells since 2016 |
|---|---|
| SWEET WATER DRILLING | 3 |
| JOHNSON DRILLING CO | 1 |
| SWEET WATER DRILLING AND EXCAVATION | 1 |
See every driller with wells on record in Lake and Peninsula Borough, ranked →
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $29Method: medians computed from Alaska DNR records (Alaska DNR WELTS well logs, water-supply wells only (monitoring, test, grounding, geothermal, reinjection and recharge wells excluded); depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.