⟁ Alaska Well Data field records · 2026 survey

Alaska Well Data › Wrangell City and Borough

Wrangell City and Borough, Alaska: well depth, water level & drilling cost

✓ 37 Alaska DNR records · verified 2026-08-23

175 ftmedian well depth
107 ft–232 fttypical depth range
25 ftmedian static water level
4 gpmmedian yield (18 tests)

How deep are wells in Wrangell City and Borough, Alaska?

The median drilled well depth in Wrangell City and Borough is 175 ft, based on 36 wells with recorded depths in the state Alaska DNR database. Half of all wells fall between 107 ft and 232 ft; 90% are shallower than 303 ft. Wells drilled since 2016 have a median depth of 325 ft.

How much does it cost to drill a well in Wrangell City and Borough?

Applying published per-foot rates to the local median depth of 325 ft: drilling and casing alone typically runs $8,125–$21,125; a complete system including pump, pressure tank, and hookup typically runs $19,500–$32,500. Actual quotes depend on site access, geology, and casing requirements.

Get quotes from drillers active in Wrangell City and Borough

Free for property owners. We route your request only to licensed drillers who actually file well logs in Wrangell City and Borough — never sold elsewhere.

What is the static water level in Wrangell City and Borough?

The median static water level is 25 ft below ground surface (middle half of wells: 15 ft–28 ft), from 3 measurements.

How much water do wells in Wrangell City and Borough produce?

The median tested yield is 4 gpm (middle half: 2 gpm–8 gpm), from 18 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Wrangell City and Borough address — $29

Drilled depth distribution

0–50 ft 0 50–100 ft 6 100–150 ft 5 150–200 ft 10 200–300 ft 11 300–400 ft 3 400–600 ft 0 600+ ft 1
Looking at a specific property in Wrangell City and Borough?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $29

Method: medians computed from Alaska DNR records (Alaska DNR WELTS well logs, water-supply wells only (monitoring, test, grounding, geothermal, reinjection and recharge wells excluded); depths 0-5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.